Polyester mortar with ETA option 7 approval, for use in uncracked concrete.
Ideal for all types of non-structural applications.
The mortar can be used for overhead applications and in dry & wet holes.
Suitable for attachment points with small edge and axial distances due to an anchoring free of expansion forces.
High chemical resistance, Low odour
High bending and pressure strength.
Excellent Load Values.
KWIK PE500-PRO is a Polyester based chemical anchor is designed especially for the Construction Industry. Few applications of KWIK PE500-PRO including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK VE500-PRO being Polyester based resin mortar is used in hammer drilled holes and are suitable for high loads. The system is based on adhesion principle. The resulting bond is stronger to the base material, no additional load stress is imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre, group anchoring. Installation Temperature of KWIK VE500-PRO from -5°C and a service Temperature up to 72°C. KWIK PE500-PRO has high chemical resistance and is suitable for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with several international approvals which prove it’s capability in nearly every application.