Vinylester chemical anchor, approved for almost any application and base material.
Approved for seismic loads according to category C1.
Approved temperature range of 120°C and a fast curing time for high loads.
Suitable for use in rotary hammer drilled holes, water filled holes, for overhead applications and embedment depths of ≥4xØ – 20xØ.
KWIK VE500-PRO is a Vinylester based chemical anchor is designed especially for the Construction Industry. Few applications of KWIK VE500-PRO including anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (normal, porous & light) as well as solid masonry. KWIK VE500-PRO being Vinylester based resin mortar is used in hammer drilled holes and are suitable for extreme loads. The system is based on adhesion principle. The resulting bond is stronger to the base material, no additional load stress is imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced centre, group anchoring. Installation Temperature of KWIK VE500-PRO from -5°C and a service Temperature up to 72°C. KWIK VE500-PRO has high chemical resistance and is suitable for applications in extreme ambiences e.g. in swimming pools (chlorine) or closeness to the sea (salt). The product is supported with several international approvals which prove it’s capability in nearly every application.